Did you know that the computer can be used as a fax machine. This will save you the cost, because you do not have to buy a separate fax machine. In fact, it can be more complicated than typical fax machine.
requirements:
1 - Computer
2 - Telephone
3 - Modem
4 - Software
software
The most advanced software for use as a fax machine is Norton Winfax. Must sell through stores that software. There are also programs on the Internet free of charge, but none of the approaches Winfax view of the simplicity and sophistication.
The advantage of using Winfax
1 - You no longer have to print the document and fax it back to normal fax machine. Simply "print", select the Winfax printer, click OK. Document must be available for difax. This saves paper.
2 - You can keep all names and addresses on Winfax. They do not look at the fax number using the manual method.
3 - fax that can be sent and received are kept as a record. You can always re-read. It may also be didelete manually or automatically (eg fax received in the last 30 days will automatically be didelete), by selecting the appropriate option.
4 - Broadcast: Sending fax to multiple locations at the same time is a simple matter. For example, it can be configured to send the fax to the A, B, C and D. Winfax try to send a fax A. If A is enabled or does not answer, so sent on to B and. Then we will try to send it back to places that have not been delivered, for example A.
5 - You can specify how often to try to send to a place where the lines are not answered or obligation.
6 - You can specify how fax sent. For example, to configure so that the fax at 12 clock, etc. sent .. You do not have to stay awake at night, as long as the computer is turned on.
7 - You can automatically or manually answer the fax machine.
8 - You can configure forwarding. For example, if the computer in the office to receive a fax to clock 12.00 bis 08.00 clock can be configured to send the fax to another number, home, for example.
Friday, June 27, 2014
Wednesday, June 11, 2014
How to repair bad sectors on a laptop
Portable Hard Drives sometimes develop bad sectors that are unreadable by the operating system. Normally this is a small group of space called sector of the hard disk that does not respond to requests to read or write; as a result, causing damage to the slow response time and sometimes files.
Consequences by HDD bad sectors are really annoying, nor can it be determined whether the problem logically (not physically). By software problems / errors created especially bad sectors and can be determined by the following procedure (see below).
To check and repair bad sectors -
Windows has a built in hard drive test tool known as check disk! This tool is basically used for testing and repair bad sectors of the hard disk drive. Current researches mainly hard drive for bad sectors and corrected all errors and makes unreadable areas of the new operating system are available.
Most of the time this integrated tool works automatically when Windows problems on the hard drive detects. But this tool can be started manually at any time, if you find that your system is acting strange, which is very slow editing or creating data loss.
Note that only one reality bad sectors of hard drives! There is certainly no reason to panic if you find your laptop, a. Here is the step by step how to repair bad sectors on the laptop procedures.
To access the chkdsk tool and scan the hard disk for errors and software to avoid bad sectors, soft, just right click on the drive you on bad sectors and select Properties, and then want the section to check the "Tools", then click "Check Now" button.
This opens a dialog with two drive options open check - 1) automatically fix system error 2) Check and help recovery of bad sectors.
Select the two ways to fix file system errors and bad sectors in order to explore simultaneously and recover.
Once you're done! Restart your laptop and you're done!
To repair bad sectors on a laptop, there are some other options you of how to choose Disco view; It is another tool worth a try so that you visually analyze each sector of the hard disk to repair.
So friends, there are certain ways to repair bad sectors on a laptop. But after reading all the above steps, if you continue to have problems; it is recommended that it is best to to fix your laptop to laptop service center problems.
Consequences by HDD bad sectors are really annoying, nor can it be determined whether the problem logically (not physically). By software problems / errors created especially bad sectors and can be determined by the following procedure (see below).
To check and repair bad sectors -
Windows has a built in hard drive test tool known as check disk! This tool is basically used for testing and repair bad sectors of the hard disk drive. Current researches mainly hard drive for bad sectors and corrected all errors and makes unreadable areas of the new operating system are available.
Most of the time this integrated tool works automatically when Windows problems on the hard drive detects. But this tool can be started manually at any time, if you find that your system is acting strange, which is very slow editing or creating data loss.
Note that only one reality bad sectors of hard drives! There is certainly no reason to panic if you find your laptop, a. Here is the step by step how to repair bad sectors on the laptop procedures.
To access the chkdsk tool and scan the hard disk for errors and software to avoid bad sectors, soft, just right click on the drive you on bad sectors and select Properties, and then want the section to check the "Tools", then click "Check Now" button.
This opens a dialog with two drive options open check - 1) automatically fix system error 2) Check and help recovery of bad sectors.
Select the two ways to fix file system errors and bad sectors in order to explore simultaneously and recover.
Once you're done! Restart your laptop and you're done!
To repair bad sectors on a laptop, there are some other options you of how to choose Disco view; It is another tool worth a try so that you visually analyze each sector of the hard disk to repair.
So friends, there are certain ways to repair bad sectors on a laptop. But after reading all the above steps, if you continue to have problems; it is recommended that it is best to to fix your laptop to laptop service center problems.
Tips on buying a computer or hardware
When it comes to buying a hardware or equipment of any store or outlet if you can get help. Problems with buying Therefore, it is best to use a computer hardware or computer from a store or outlet that is reliable and offer the best service to buy.
Computers and electronic devices can be easily damaged when it is an outlet difficult or help a client store, you will be in trouble if what you buy is not working well. They are not simply acquired by a glance at the price tag and electronics hardware. It might work if installed dikedai after use one or two days, suggests the computer works correctly.
When you buy a new computer, install the equipment and let it installed for a day. This diokenali process as burn-in. If the computer malfunctions, return to the store and buy a new one or ask them to look at the cause and correct. If there are many shops and outlets that sell equipment in your area, select the store that provides support and after-sales service.
In fact, every computer or perkaksan sold with manual, but the manual is Panjan, full of small and hard to understand lyrics. You need a lot of support because technicians handle hardware. They are very experienced and are able to find the source massalah quickly.
Do not be afraid to ask. Do not get confused between technical support and customer service. When you buy a computer in a mall, you call customer service for support. Employees will not help you upgrade your computer or hardware. You Hague if you want to return the merchandise for sale or resolve.
Most computer hardware has a warranty. If an item does not work properly, you can replace the item if it is damaged while under warranty. Make sure you understand the terms of guarantee when making a purchase.
Computers and electronic devices can be easily damaged when it is an outlet difficult or help a client store, you will be in trouble if what you buy is not working well. They are not simply acquired by a glance at the price tag and electronics hardware. It might work if installed dikedai after use one or two days, suggests the computer works correctly.
When you buy a new computer, install the equipment and let it installed for a day. This diokenali process as burn-in. If the computer malfunctions, return to the store and buy a new one or ask them to look at the cause and correct. If there are many shops and outlets that sell equipment in your area, select the store that provides support and after-sales service.
In fact, every computer or perkaksan sold with manual, but the manual is Panjan, full of small and hard to understand lyrics. You need a lot of support because technicians handle hardware. They are very experienced and are able to find the source massalah quickly.
Do not be afraid to ask. Do not get confused between technical support and customer service. When you buy a computer in a mall, you call customer service for support. Employees will not help you upgrade your computer or hardware. You Hague if you want to return the merchandise for sale or resolve.
Most computer hardware has a warranty. If an item does not work properly, you can replace the item if it is damaged while under warranty. Make sure you understand the terms of guarantee when making a purchase.
Tuesday, June 3, 2014
Use diagnostic software to control your PC hardware
Included with the Windows Device Manager. This software is used to keep track of any hardware failure. Use software to keep track of hardware problems. To open Device Manager, the following:
Click on the Control Panel icon. This symbol is in the start menu
Click on the Device Manager icon
Device Manager displays the hardware attached to the computer. If the hardware or device driver is not functioning properly, a warning is displayed in the hardware.
Click on the Control Panel icon. This symbol is in the start menu
Click on the Device Manager icon
Device Manager displays the hardware attached to the computer. If the hardware or device driver is not functioning properly, a warning is displayed in the hardware.
Subscribe to:
Posts (Atom)